Warehouse Drive in Pallet Racking System for Cold Room and Processing Industrial

Through shelves, sheet by column, shelf, shelf bracket, roof beams and other accessories form rod truck to put the tray into the channel memory is also called into the shelves, suitable for storing large quantities and less variety of similar goods as long as the primary channel for leaving a...

Product Details

Through shelves, sheet by column, shelf, shelf bracket, roof beams and other accessories form rod truck to put the tray into the channel memory is also called into the shelves, suitable for storing large quantities and less variety of similar goods as long as the primary channel for leaving a truck can pass, high utilization of space, you can use the 80% of the total volume of the warehouse, shelf is relatively low cost.

1贯通式货架.jpg


Purchasing Note:
1. You must know your pallet size, into the cross direction, the pallet capacity, each pallet position requires the maximum weight of stored goods.
2. Your warehouse storage size, height, location of fire hydrants, exits, and so on.
3. Your forklift comprehensive data, the largest held high, the largest weighed, fork width.

The above three points into the rack for the design must be considered indispensable.
Goods from the shelves and out of the same side, after the first deposit to take, take after the first deposit. It is relatively low investment costs for long horizontal size, fewer species, quantity, used to store a large number of the same pallets of goods, and thus a larger storage density higher utilization of space on the ground.


Product Details:

2贯通式货架细节.jpg


Drive-in Racking Features:
1. The support rail, storage pallet according to the depth direction, one followed by one, which makes high-density storage possible.

2. Cargo access from the shelves and out of the same side, after the first deposit check and balance weight and reach trucks can easily access of goods into the middle shelf, without taking a number of channels.

3. This racking for storing large quantities and less variety of goods.

4. Plug into the rack assembly of the whole structure, column structure film was fabricated, the total depth of the shelf against the wall region can be designed for the maximum depth of less than 7 pallets, in the middle region could total depth on both sides of the shelves and out usually in the depth of 9 pallets in order to improve the efficiency and reliability of the forklift access.

5. Widely used in various warehouses and logistics centers such as: food, tobacco, dairy and beverage industries, cold storage is also more prevalent.


Real Cases:

3贯通式货架.jpg4贯通式货架案例22.jpg5贯通式货架案例23.jpg


Export Packing:

6打包装箱加水印.jpg

We are one of the professional factories in china that are good at the planning, design, manufacture and installation of drive in racking system. If you have any inquiry of drive into pallet racking system, welcome to contact us. And the customized orders are also welcome.


Inquiry

Related Products