The cantilever belongs to the category of storage shelf category, and it adopts special profile columns with high-strength cantilever. It is suitable for storing various long materials, ring materials, plates and irregular materials. The reach cantilever can be single-sided or double-sided, with the characteristics of light structure, good load capacity, single-arm weight up to 1000kg. Specially reinforced column structure, can withstand 2000 ~ 3000kg pressure. The design of the back pull increases the overall stability of the shelf, the installation is simple, and the accessories are complete. Combined structure, special profile column, design back pull to increase stability, with high strength cantilever (arm can be single-sided or double-sided), with a light structure, good load capacity, high space utilization; after adding a shelf, special Suitable for small space, low height of the warehouse, easy management, wide field of vision, compared with ordinary shelf-type shelves, the utilization rate is higher; according to the carrying capacity can be divided into light, medium-sized, weight-based three.
1. The use of square tube production: cantilever shelves according to the corresponding cantilever layer load requirements, first select the square tube that meets the requirements of the layer load, cut into the required size, in one welding non-slip plate, the other end of the welding connection U-shaped column connector Made from.
2, using C-shaped steel production: Cantilever shelves in accordance with the corresponding cantilever layer load requirements, first select the specifications of C-beam, after the election will be two C-beam steel butt welding, after welding in a welded skid plate, the other welding Connect the U-shaped post connector.
The cantilever shelf column sheet and the column sheet are connected by a connecting rod, and the connecting rod is generally made of a rectangular tube. To increase safety and stability, add a flat iron back on the connecting rod to pull the special puller to fix the column tightly.
3. All cantilever shelf components are semi-finished after the production is completed and will be sprayed through the last process. Prior to spraying, a shot blasting machine was used to remove oil and rust, followed by spraying. After the completion of the package delivery.